SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damages that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference.
Put the cutlery in the cutlery basket with the sharp ends • pointing down or put them in the cutlery drawer in a horizontal position with the sharp edges down. Do not leave the appliance with the open door unattended to •...
Page 4
• Do not put flammable products or items that are wet with flammable products in, near or on the appliance. SERVICE • Contact the Authorised Service Centre to repair the appliance. We recommend only the use of original spare parts. •...
CONTROL PANEL On/off button Programme button Programme indicators Indicators INDICATORS End indicator. Salt indicator. It is always off while the programme operates. PROGRAMMES Consumption values Degree of soil Programme Programme phases Type of load Duration Energy Water (min) (kWh) Normal soil •...
Consumption values Degree of soil Programme Programme phases Type of load Duration Energy Water (min) (kWh) • Prewash 1) The pressure and the temperature of the water, the variations of the mains supply, the options and the quantity of dishes can change the values. 2) With this programme you have the most efficient use of water and energy consumption for crockery and cutlery with normal soil.
Page 7
ADJUSTING THE WATER SOFTENER 1. While the appliance is in user mode, wait until the indicators are off. • The indicator still flashes. • The current setting is indicated by the number of flashes of the indicator (e.g. 5 flashes + pause + 5 flashes...
While the drying phase operates, the device opens the appliance door. The door is then kept ajar. While the appliance is in user mode, within about 5 seconds: 1. Press the programme button twice. • The indicators are on. • The indicator flashes.
CAUTION! Water and salt can come out of the salt container during filling. To prevent corrosion, start a programme immediately after filling the salt container. ADDING RINSE AID The rinse aid helps to dry the dishes without streaks and stains. It is automatically released during the hot rinse phase.
ADDING MULTI-TABLETS • Do not fill the salt container and the rinse aid dispenser. • Set the rinse aid dispenser to the lowest position. SETTING AND STARTING A PROGRAMME Starting a programme 1. Keep the appliance door ajar. 2. Press the on/off button to activate the appliance. Make sure that the appliance is in programme selection mode.
nozzles. Make sure that items do not touch or 3. Start the shortest programme with a rinsing cover each other. phase. Do not add detergent and do not load • You can use dishwasher detergent, rinse aid the baskets. and salt separately or you can use the multi- 4.
CARE AND CLEANING WARNING! Before maintenance, Dirty filters and clogged spray arms deactivate the appliance and decrease the washing results. Make a disconnect the mains plug from the check regularly and, if necessary, main socket. clean them. CLEANING THE FILTERS •...
TROUBLESHOOTING If the appliance does not start or it stops during With some problems the end indicator flashes operation, before you contact an Authorised intermittently indicating a malfunction. Service Centre, check if you can solve the problem The majority of problems that can occur can by yourself with the help of the information in the be solved without the need to contact an table.
Problem and alarm code Possible cause and solution The appliance door is difficult to close. • The appliance is not levelled. Loosen or tighten the adjustable feet (if applicable). • Parts of the tableware are protruding from the bas- kets. Rattling/knocking sounds from inside the •...
Page 15
Problem Possible cause and solution The dishes are wet. • For the best drying performance activate AirDry. • The programme does not have a drying phase or has a drying phase with low temperature. • The rinse aid dispenser is empty. •...
TECHNICAL INFORMATION Dimensions Width / height / depth (mm) 446 / 818 - 898 / 550 Voltage (V) 220 - 240 Electrical connection Frequency (Hz) Water supply pressure Min. / max. bar (MPa) 0.5 (0.05) / 8 (0.8) Water supply max 60 °C Cold water or hot water Capacity...