Connecting The Fm Antenna - Samsung HT-C6730W User Manual

HDMI IN : Connecting to an External Component with an HDMI Cable
1. Connect an HDMI cable (not supplied) from the HDMI IN jack on the back of the product to the
HDMI OUT jack on your digital devices.
2. Press the FUNCTION button to select HDMI 1 or HDMI 2 input.
The mode switches as follows : BD/DVD
HDMI Auto Detection Function
The product's video output will automatically change to HDMI mode when connecting an HDMI cable
before power is on. For possible HDMI resolutions, see page 31.
•
This function is not available if the HDMI cable does not support CEC.
•
HDMI connection description
- HDMI outputs only a pure digital signal to the TV.
- If your TV does not support HDCP, random noise appears on the screen.
•
What is the HDCP?
HDCP (High-band width Digital Content Protection) is a system for protecting BD/DVD content outputted via
HDMI from being copied. It provides a secure digital link between a video source (PC, DVD. etc) and a display
device (TV, projector. etc). Content is encrypted at the source device to prevent unauthorized copies from being
made.
!
CAUTION

The Anynet+ function is supported only when an HDMI Cable is connected to the HDMI OUT of the
product.
FM Antenna (supplied)
iPod
D. IN

Connecting the FM Antenna

FM ANT
DIGIRA
WIRELESS
AODIO I
OPTICA
AUX HDMI 1 HDMI 2
1. Connect the FM antenna supplied to the
FM 75Ω COAXIAL Jack.
2. Slowly move the antenna wire around until
you fi nd a location where reception is good,
then fasten it to a wall or other rigid surface.
✎
NOTE

This product does not receive AM
broadcasts.
FM
23
English