Installing The Speakers On The Tallboy Stand - Samsung HT-C5500 User Manual

Installing the Speakers on the Tallboy Stand

* HT-C5530 only - Front Speakers
* HT-C5550 only - Front/Surround speakers
1. Turn the Stand Base upside-down and
connect it to the Stand.
2. Insert four small screws clockwise into the four
holes marked using a screwdriver as shown in the
illustration.
3. Connect the upper Speaker to the assembled
Stand.
4. Insert another large screw clockwise into
the hole on the rear of the speaker using a
screwdriver.
Connecting The Speakers
1. Press down the terminal tab on the back of the speaker.
2. Insert the black wire into the black terminal (–) and the red wire into the
red terminal (+), and then release the tab.
3. Connect the connecting plugs to the back of the product by matching
the colours of the speaker plugs to the speaker jacks.
In case of HT-C5500
Centre Speaker
Front Speaker (R)
Surround Speaker (R)
* Refer to page 18 for the speakers of HT-C5530/C5550.
1
3
Stand
SPEAKER IMPEDANCE : 3
FM ANT FM ANT
iPod iPod
SPEAKER IMPEDANCE : 3 SPEAKER IMPEDANCE : 3
2
Stand
Base
Stand
4
Speaker
Black
Front Speaker (L)
Subwoofer
Surround Speaker (L)
English
Red
19