Ferguson REGENT i350s+ Manual page 77

connection between the router and the device will then be configured
automatically.
3.9.3.3 Manual Configuration
You can choose DHPC (which IP assigned automatically) manually
input IP address for wireless network connection.
When you select manual setting for wired connection, the followings
have to be entered:
 SSID ( the name of Access Point);
 IP Address
 Subnet Mask
 Default Gateway
 Preferred DNS Server
 Alternate DNS Server
You may choose (Manage) specific network if you have setup more
than one network connection within an area.
3.9.3.4 Check Network when Power On
"Enable / disable WiFi network":
When you enable the WiFi network, the system will automatically
search the available AP.
Select your required AP.
Enter WEP or WPA/WPA 2 code to connect the WiFi.
If the wireless network connection is not existed or failed, the icon at the
top left corner will have a cross on it.