Ferguson REGENT i350s+ Manual page 76

3.9.3 Network
3.9.3.1 Wireless Network Configuration
Enable / disable WiFi network. When you enable the WiFi network, the
system will automatically connected to the network.
Select your required AP.
Enter WEP or WPA/WPA 2 code to connect the WiFi.
If it is accidentally pressed ＞ to move a redundant entry, press ＜
to correct.
3.9.3.2 Wireless Network (WPS PBC)
If you are using a router with WPS/QSS button, you may set up the
network connection simple via WPS function. Enter it and go to press
the WPS/QSS button on your router within 120 seconds. The