Check Contents - Wire it Up! - Plug It In! - Install Optimize System- - Verify Installation - Set Audio Mixer - Installation Summary
2. Wire It Up!
In this section we will connect all audio
and video cables that you will use to
capture audio and video and then send
audio and video back to a TV or VCR for
viewing or recording.
1. Connect your video source (VHS,
DVD, Laser Disc Player, TV. etc.) to
your USB Instant DVD.
Connect your
the 3 RCA jacks to your analog audio/
video source RCA Line Out.
The other end connects to the "RCA
Video In" jack and "Audio In" jack on the
back of your USB Instant DVD.
10
CapWiz manual.p65
USB INSTANT DVD INSTALLATION
(D) 6 ft. A/V In cable
10
A/V Source
to
USB Instant DVD
6/4/2002, 12:21 PM