Table of Contents
Advertisement
Connecting a VMS-B-Module to pumping units
Assembling to pumping units PC 5xx NT / PC 6xx NT
Das Dokument darf nur vollständig und unverändert verwendet und weitergegeben werden. Es liegt in der Verantwortung des
Anwenders, die Gültigkeit dieses Dokumentes bezüglich seines Produktes sicher zu stellen.
Documents are only to be used and distributed completely and unchanged. It is strictly the users' responsibility to check carefully
the validity of this document with respect to his product.
Seite/page 15/20
-
Pull controller CVC 3000 out of the housing.
-
Insert connection cable of the VMS-B-Module between
pump and front part in direction of the controller.
-
Unplug connection cable of the controller to the pump and
plug in cable from the VMS-B-Module.
-
Insert controller into housing.
Only PC 520 NT / PC 620 NT: Connect the second controller
analog to the VMS-B-Module.
Accessory:
VACUU•BUS
extension cable .............................. 20612552
TM
Advertisement
Table of Contents
