Advertisement
Warning!
Consuming water with arsenic levels above the USEPA MCL (Maximum Contaminant Level)
of 10 PPB (10 µg/L) can cause cancer, cardiovascular/respiratory distress, skin ailments, and
developmental delays (in children).
Always install and operate this system according to manufacturer instructions. Test water quar-
terly to verify proper system operation.
Water Control offers inexpensive, non-certified test services (the first 5 test bottles are included
free with system).
System Capabilities
Typical Media Life: 7 years*
Media Regeneration: once per day
Maximum Arsenic III + Arsenic V in raw water: 150 PPB (μg/L)
Maximum Iron + Manganese + Hydrogen Sulfide in raw water: 5 PPM (mg/L)**
Minimum Iron + Manganese in raw water: 0.3 PPM (mg/L)***
Minimum Dissolved Oxygen in raw water: 2 PPM (mg/L)****
Regeneration Water Usage
Model EL33-150 34 gallons (@ 1.7 GPM)
Model EL33-250 48 gallons (@ 2.4 GPM)
System Test Challenges
Raw Water
Test
Total Arsenic
#
PPB
1
100
2
100
3
100
* IMPORTANT: Test your water quarterly to ensure proper system operation!
Five postage pre-paid test bottles included!
To reorder, visit
watercontrolinc.com/element33-arsenic-removal
** Exceeding 5 PPM iron, manganese and hydrogen sulfide will reduce the system's flow rate
capabilities. Contact WCC for a system sizing recommendation.
*** There must be a combined minimum of 0.3 PPM for iron and manganese. Contact WCC if
levels are below this minimum. Alternate equipment may be required for the application.
**** Low dissolved oxygen may reduce arsenic removal efficiency. Contact WCC for recom-
mended options for applications that do not meet the minimum requirement.
Into Filter
Fe
Mn
H
2
PPM
PPM
PPM
10
10
10
1
1
1
0.5
0.5
0.5
Treated Water Out of Filter
S
Total Arsenic
PPB
None detected
None detected
None detected
or scan this QR code:
2
Fe
Mn
H
2
PPM
PPM
PPM
0
0
0
0
0
0
0
0
0
S
Advertisement
