VCR
Presetting the Stations Manually
Language
: English
Install
GB
User Set
Auto Power Off
: Off
Screen Messages
: On
Install
Auto Setup
Manual Setup
TV System
: K
VCR Output CH
: CH 36
TV STATION TABLE
PR
CH
NAME
DEC
1
2
3
4
5
SWAPPING : OK
DELETE : CLEAR
RETURN
MANUAL TUNING
PR
:
CH
: - - -
MFT
: -
DECODER
: OFF
NAME
: - - - -
MEMORY : OK
RETURN
20
☛
You do not need to preset the stations manually if you
have already set them automatically.
1
After pressing the MENU, press the OK or ❿ .
Result:
The Setup menu is displayed.
2
Press the corresponding
,
buttons to select the
❷
option.
3
Press the OK or ❿ to select this option.
Result:
The
Install
menu is displayed.
4
Press the corresponding
or
buttons, until the
❷
Setup
option is selected.
5
Press the OK or ❿ to select a
Manual Setup
Result:
The
TV STATION TABLE
menu is displayed.
6
Press the
or
buttons to select a programme number as
❷
required.
Press the ❿ button to preset the station.
7
Result:
The
menu is displayed.
MANUAL TUNING
8
Press the ➛ or ❿ buttons to start scanning channel.
Result:
The frequency band is scanned and the first station
found is displayed.
9
Press the
button, until the
is selected.
DECODER
❷
10
Press the ❿ button to activate or deactivate use of the decoder
for the TV station, if necessary.
11
Press the
or
buttons until the
is selected.
NAME
❷
The station name is set automatically from the broadcast signal.
12
To change the programme's name, press the ❿ button.
Result:
The first letter of the name flashes.
13
To...
Then...
Select a character
Press the
or
❷
in the name
required character is displayed
(letters, numbers or "-" character).
Press the ➛ or ❿buttons
Move to the next or
previous character
respectively.
14
If you...
Then...
N
Wish to store the
Press the
or
buttons until the
❷
station displayed
is selected.
Press the ➛ or ❿ buttons to adjust the
N
picture, if necessary.
N
Press OK to store the station
N
Do not wish to
Press the
or
buttons until the
❷
store the station
is selected.
Press the ➛ or ❿ buttons to go on
displayed
N
scanning the frequency band and display
the next station
N
Go back to the beginning of Step
15
6
Repeat this procedure from Step
onwards, until all the required
stations have been stored.
16
On completion, press the RETURN button three times to exit the
menu.
Clearing a Preset Station
If you have stored a TV station:
N That you do not require
N At the wrong programme position
you can cancel it.
Install
1
After pressing the MENU, press the OK or ❿ .
Result:
Manual
2
Press the corresponding
option.
option.
Press the OK or ❿ to select this option.
3
Result:
4
Press the corresponding
Setup
5
Press the OK or ❿ to select a
Result:
6
Press the corresponding
preset TV station (PR) is selected.
7
Press the CLEAR button.
8
Repeat the same procedure from Step
required stations have been cleared.
9
On completion, press the RETURN button four times to exit the
menu.
button until the
MFT
CH
14
The Setup menu is displayed.
,
buttons to select the
Install
❷
The
menu is displayed.
Install
or
buttons, until the
Manual
❷
option is selected.
Manual Setup
option.
The
TV STATION TABLE
menu is displayed.
or
buttons, until the required
❷
6
onwards until all the
VCR
Language
: English
Install
GB
User Set
Auto Power Off
: Off
Screen Messages
: On
Install
Auto Setup
Manual Setup
TV System
: K
VCR Output CH
: CH 36
TV STATION TABLE
PR
CH
NAME
DEC
1
21
2
3
4
5
SWAPPING : OK
DELETE : CLEAR
RETURN
21