Table of Contents
Advertisement
Saw the included flexible PVC-pipe in 2 adequate pieces. Glue these 2 pieces of PVC-pipe
9.
into an elbow of 90°. Screw the included connection of 50 mm to the pump connection of
the valve. Use Teflon for an optimal sealing. Glue 1 end of the pipe into the connection of
50 mm and the other end into the connection with swivel to assemble to the pump. Screw
the connection with swivel onto the pump. Use Teflon for an optimal sealing. The end
result looks like this.
*With the right PVC-pieces, connections to other diameters are always possible.
The electrical installation can differ. Therefore there is no plug on the cable of the pump.
10.
Depending on local legislation, you may use a standard plug, a differential plug or a direct
conection to the fuse box to provide the installation of power with a socket. We
recommend to use a differential plug for a safer installation.
9
Advertisement
Table of Contents
