Subtitle Language
To set the Subtitle Language to your preferred language, follow
these steps. If your preferred language is available on a DVD,
your Subtitle Language will automatically be set to the language
you choose.
1
Open "MENU"
Press the MENU button while the DVD is in Stop mode.
2
Select "DVD"
or
Use the
buttons to highlight "DVD"
❷
then press the OK or
3
Select "Subtitle"
Highlight "Subtitle", then press the OK or
4
Set "Subtitle Language" Preference
Highlight your preferred language for subtitles, then press the
❿
OK or
buttons.
Dolby Digital Out
If your A/V receiver is equipped with a Dolby Digital decoder,
your DVD-VCR can output Dolby Digital 5.1 sound, but you
MUST enable this feature in the menu system to prevent damage
to your speakers.
NOTE:
Select "Bitstream" ONLY if you have connected a Dolby
Digital-equipped A/V receiver to the Digital Output
(optical or coaxial) on the DVD back panel.
1
Open "MENU"
With the DVD in stop mode, press the MENU button.
2
Select "DVD"
or
Use the
buttons to highlight "DVD " then press the OK
❷
❿
or
buttons.
3
Select "Audio Setup"
Highlight "Audio Setup", then press the OK or
4
Set "Dolby Digital Out"
Highlight "Dolby Digital Output" then press the
to select one of the following options:
• PCM - To use your DVD-VCR with an A/V receiver NOT
equipped with a Dolby Digital decoder.
• Bitstream – To use your DVD-VCR with an A/V receiver
equipped with a Dolby Digital decoder.
❿
buttons.
❿
buttons.
❿
buttons.
❿
or OK buttons
DVD
Setup
Setup
Display Setup
Setup
:
Language Setup
Disc Menu
: English
Audio
: English
Subtitle
: Automatic
Subtitle Language
Automatic
Subtitle
DVD
Setup
Setup
Display Setup
Setup
:
Dolby Digital Out
MPEG-2 Digital Out
DTS
PCM Down Sampling
GB
PCM
Bitstream
47