Table of Contents
Advertisement
Inserting Batteries in the Remote Control
You must insert or replace the batteries in the remote control when
you:
Purchase the DVD-VCR
Find that the remote control is no longer working
correctly
1
Push the tab in the direction of the arrow to release the battery
compartment cover on the rear of the remote control.
2
Insert two AA, R6 or equivalent batteries, taking care to respect
the polarities:
+ on the battery with + on the remote control
– on the battery with – on the remote control
3
Replace the cover by aligning it with the base of the remote
control and pushing it back into place.
Do not mix different battery types (manganese and
alkaline for example).
Setting the Date and Time
You must set the date and time when:
You purchase the DVD-VCR
The power supply remains off for more than 60 seconds
Do not forget to reset the time when you change
clocks from winter to summer time and vice versa.
1
Press SETUP on the remote control.
Result:
The programming menu is displayed.
2
Press the corresponding ➛ or ❿ buttons to select the
SET
option.
3
Press the ENTER button to select this option.
Result:
The
CLOCK SET
menu is displayed.
4
Press ➛ or ❿ to select the hour, minutes, day, month and year.
Result:
The option selected flashes.
5
Press the
or
buttons to increase or decrease the value.
❷
Result:
The day of the week is displayed automatically.
You can hold the
or
buttons down to scroll more
❷
quickly through the values.
6
On completion, press RETURN twice to exit the menu.
1
CLOCK SET
➛ ❿
ENTER
END:RETURN
CLOCK
12:00
1/JAN/2001
MON
➛❿
❷
END:RETURN
13
GB
Advertisement
Table of Contents
