Installing The Product On A Rack, Etc - Pioneer PDK-TS03 Operating Instructions Manual

7 Installing the Product on a Rack, etc.

¶ Make sure to secure at least the following minimum spaces, specified below, in front and in back
of the table top stand.
(These spaces ensure that the table top stand does not protrude from the rack when it is rotated to
the maximum.)
If using a rack for which the aforementioned spaces cannot be secured, place the rack as close to
a wall as possible and give priority to securing the space in front.
If the stand protrudes from the rack when ro-
tated, it could cause unforeseen accidents, such
Note
as the equipment breaking or falling over.
Protrusion is dangerous.
Plasma display
Table top stand
Back
Rack
Front
15