Installing The Product On A Tv Table Etc - Pioneer PDK-1015 Operating Instructions Manual

Table top stand
Table of Contents

Advertisement

Available languages

Available languages

Installing the Product on a TV table etc.

Be sure to observe the following precautions when moving
or installing this product with a Plasma Display into a TV
table or other enclosure.
When installing on a TV table, etc., please be sure
that the Plasma Display is held by two people.
Caution
Precautions when moving
When moving the product more than a few
meters, first remove the speaker, then remove
the Plasma Display from the stand and move the
Caution
speaker, Plasma Display, and stand separately.
When detaching the Plasma Display from the
stand, be sure to follow the procedure described
in "Detaching the Plasma Display from the
Stand" on page 7.
Precautions when installing in a TV
table or other enclosure
When installing in a TV table or other enclosure, hold
the Plasma Display by the handle at the bottom, with
your other hand hold the top. If you hold the speakers,
Caution
they may be damaged or twisted.
Do not hold the speaker
Hold the Plasma Display by the handle at the bottom, with
your other hand hold the top.
Except side speaker model
Hold the Plasma Display by the handle at the bottom, with
your other hand hold the top.
Installation precautions
Make sure that you always secure a space at least as large
as that shown in the following diagram in front of and
behind the table top stand.
Min. 30 mm
TV table
(1-3/16 inch)
Back
Front
Table top stand
Plasma Display
Min. 30 mm
(1-3/16 inch)
5
En

Advertisement

Table of Contents
loading

Table of Contents