Table of Contents
Advertisement
DC-3000 SERIES ULTRASONIC THICKNESS GAUGE
Press
into" SETTING" – "Velocity rate"-"Material"
Press
or
Press
to confirm.
Notice: Velocities for 9 materials are just theoretic values. If users want to
get accurate measurements, please refer to "Velocity measurement" and
get the more accurate sound velocity.
8.5.1.2 Velocity input
Sound velocities of 9 materials is not satisfied with the requirements of
the users, there is a sound velocity table which give the sound velocity of
various materials in the appendix. Take this table to set correct sound
velocity reference.
Press
key into the menu- "SETTING"-"Vel. Rate"-"Vel. input",
Press
or
new velocity,
Press
to store this new Velocity.
Press
or
Press
to confirm.
8.5.1.3 Velocity measurement
Owing to workpiece that is made from various materials and even the
same material with different content and processing technology, the
sound velocity will be changed and this change will cause the measuring
to select material needed,
to move the arrow, press
to select the place where you want to store,
- 9 -
or
to put the
Advertisement
Table of Contents
