Samsung DVD-SR270M User Manual page 79

Troubleshooting (DVD)
Problem
You cannot use the operation or function due to one of the following reasons:
icon appears on
(1) Your DVD disc does not support the feature (for example, angles)
the screen.
(2) You've requested a title, chapter, or scan time that is out of the correct range.
Play mode settings are
diff erent from the The disc does not support all the selected functions.
settings confi gured In this case, some settings you confi gure on the Setting menu may not work properly.
with the Setting menu.
Cannot change the
Aspect ratio is fi xed for DVD disc.
aspect ratio.
No audio output. Check whether you selected correct digital output options in the Audio Output Options menu.
Did you move your DVD Recorder suddenly from a cold place to a warm place? In this case, do
No video or audio output.
not connect the plug to the power outlet and wait for two hours.
The disc tray is ejected after
Then insert the disc and try to play again. It will work properly when condensation has
2 to 5 seconds.
evaporated.
Angle operation does not
work during playback of Angle operation is available only when the disc contains images captured at diff erent angles.
a DVD disc.
• Check whether there is damage or foreign materials on your disc.
The disc revolves, but no
• Some discs with bad manufacturing quality may not be played back.
image or bad quality
• If the scene changes from dark to bright suddenly, the screen may jitter temporarily, but it is
images are output.
not a defect.
Desired audio language Audio languages and subtitle languages are disc-specifi c.
and subtitle language Only the sound and subtitle languages contained on a DVD disc are available and displayed on
are not played. the disc menu.
No progressive
• Check whether you selected correct Progressive options in the Video Options.
output.
• Point the remote control at the remote control sensor on your DVD Recorder. Operate within
The remote control distance. (15ft)
doesn't work. Remove obstacles between your DVD Recorder and remote control.
• Check whether the batteries are depleted.
• Read the table of contents and then fi nd and read the sections describing your problem, and
follow the directions given.
Other problems
• Turn the unit off and on.
• If your problem still persists, contact your nearest Samsung service centre.
• Check the Video output is HDMI enabled.
No HDMI output.
• Check the connection between the TV and the HDMI jack of the DVD Recorder.
(DVD-SR275M only)
• See if your TV supports this 576p/720Pp/1080i/1080p DVD Recorder.
Abnormal HDMI output
• If snow noise appears on the screen, it means that TV does not support HDCP
screen. (DVD-SR275M
only)
• Check your TV system setup correctly.
HDMI output Jitter • Screen Jitter may occur when the frame rate is converted from 50Hz to 60Hz for 720p/1080i/
(DVD-SR275M only) 1080p HDMI (High Defi nition Multimedia Interface) Output.
• Please refer to the user's manual of your TV.
Explanation/Solution
(Highbandwidth Digital Content Protection).
English - 79