Craftsman CMEBL7000 Instruction Manual page 10

English
nOTE: If the suction decreases and the bag is not full,
the vacuum tube is probably clogged with debris. Turn
OFF and unplug the blower/vac and clear the tube
before continuing.
2. To re-seal the back pack collection bag
bag zipper so the opening is closed.

WARNING:
without blow tube or flexible collection tube securely
in place. Never reach down into housing through
tube hole.
What to Do if the Unit Jams (Fig. O)

WARNING:
serious personal injury, turn unit off and
disconnect it from power source before making
any adjustments or removing/installing
attachments or accessories. An accidental start-up
can cause injury.
If the unit motor stops, the fan has become jammed.
Immediately turn the unit off and stop using the tool
until the jam is cleared. If this happens, turn the unit off
and disconnect from power supply. Remove the bag and
vacuum tube. Remove the jamming material using a small
wooden stick. Do not use a metal implement or anything,
which may damage the fan or scratch the plastic. Ensure the
fan will turn by hand before reassembling the unit.
If the unit stops picking up debris or the performance
substantially reduces it may have become clogged. Switch
the unit off and disconnect from power supply. Remove the
vacuum tube and look down the tube to ensure no debris is
blocking it. If necessary remove debris with a small wooden
stick. Do not use a metal implement or anything, which may
scratch or damage the tube. Remove the bag. If the bag is
full, empty the bag. If necessary remove any debris from
around the fan or unit outlet using a small wooden stick. Do
not use a metal implement or anything which may damage
the fan or scratch the plastic. Ensure the fan will turn by
hand before reassembling the unit.
Fig. O
8
8 , zip up the
Do not operate blower
To reduce the risk of
MAINTENANCE

WARNING:
serious personal injury, turn unit off and
disconnect it from power source before making
any adjustments or removing/installing
attachments or accessories. An accidental start-up
can cause injury.
Versatrack™ (Fig. P)

WARNING:
of serious personal injury, turn unit off
anddisconnect it from power source before
making any adjustments or removing/installing
attachments or accessories. An accidental start-up
can cause injury.

WARNING:
personal injury, do not use a damaged Versatrack™
integral hang hook or Versatrack™ Trackwall.
A damaged Versatrack™ integral hang hook or
Versatrack™ Trackwall will not support the weight of
the tool.

WARNING:
personal injury, DO NOT suspend tool overhead or
suspend objects from the integral hang hook. ONLY
suspend tool on the Versatrack™ Trackwall using the
integral hang hook.

WARNING:
hang hook is intended to mount the tool onto a
Versatrack™ Trackwall rail. Do not use the integral
hang hook to mount the tool to any other surface.

WARNING:
hang hook is not a belt hook.

WARNING:
Versatrack™ Trackwall rail, adequately space the tools
in order to not exceed 75 lb (35 kg) per linear foot.

WARNING:
sure that the Versatrack™ integral hang hook is
returned to its original position.
iMPORTAnT: Versatrack™ accessories mount compatible
tools securely to the Versatrack™ Trackwall system.
1. Turn tool off, disconnect it from power source and
remove accessories.
To reduce the risk of
To reduce the risk
To reduce the risk of serious
To reduce the risk of serious
The Versatrack™ integral
The Versatrack™ integral
When hanging objects on a
Before using the tool make