Tips; Cleaning And Maintenance - Fakir SIGNATURE User Manual

ATTENTION!
Do not change the grinding setting while the appliance is operating. If you change the
fineness setting while your appliance is still grinding, the ground motor can get stuck.
NOTE !
To remove the coffee grinder, turn the coffee grinding fine select switch to the minimum
position, then hold the side wings of the grinder with your fingers and turn it clockwise,
then pull it towards you to remove it.

Tips

• To protect the aroma of your coffee, we recommend that you grind a few minutes before
making your coffee.
• The aroma from the coffee depends on the quality of the grinding, we recommend that
you choose the most suitable fineness according to the type of coffee you will make and
the appliance you will brew. In general, the faster the coffee making technique, the better
the coffee should be. For example, if you want to brew a quick coffee such as espresso,
ground coffee must be fine. The coffee grinder for espresso is thinner than the ground
coffee for coffee. A very finely ground coffee, prepared for espresso, is used to filter coffee
when you taste a bitter taste. If the ground coffee is used for the coffee espresso, the filter
gives a weak and uninspired flavour.
• Use the coffee grinding fineness select button to adjust the fineness of your ground coffee
to the type of coffee machine you are using and to your taste.
• For the first time, we recommend that you select an intermediate position based on the
type of your coffee machine and then adjust the degree of finesse to your taste. If you use
the appliance several times, you will find a suitable grinding setting.

Cleaning and Maintenance

Unplug the appliance. Never immerse your appliance in water.
We recommend that you clean the appliance after each use.
Clean the bean adding chamber cover, the ground coffee chamber and the cover with
warm non-abrasive soapy water. Wipe the inside of the coffee bean adding chamber with a
soft piece of cloth. Clean the coffee grinder with a brush and wipe it with a soft cloth. Never
immerse your appliance in water or keep it under a running water. Make sure that all parts
are completely dry before installing them to the appliance. Dry the parts with a soft cloth
and then install them on the appliance.
Clean the coffee that has accumulated in the ground coffee outlet with the help of a brush.
25
EN