EN
First Use
Make sure you understand all the parts and features of your Signature coffee grinder
appliance. Always remove packaging materials and labels before first use. Make sure that
your appliance is not packaged as missing.
Before using your appliance, clean it by following the steps indicated in Cleaning and
Maintenance part.
Usage
• Insert the ground coffee chamber and cover into the area on the front of the appliance by
pushing it towards the body of the appliance. When the chamber is placed into the body, it
clicks.
• After removing the coffee bean chamber cover, insert the coffee grinder by turning it
counter clockwise into the place in the chamber.
• Add the coffee beans into the chamber, paying attention to the maximum level line. Place
the coffee bean adding chamber cover on to the chamber.
• Choose between 2 to 10 portions using the coffee portion selection button for the amount
of coffee that has been taken.
• Choose the coffee fineness according to the coffee type you want to brew from the coffee
grinding selection button.
• Plug the appliance.
• Press the on-off button to run the appliance. The blue light turns on and the appliance
starts.
• Your machine will stop automatically after grinding the selected portion quantity of coffee.
If you want to stop your appliance earlier, press the power button 1 time.
• You can use the ground coffee according to your preference by removing the ground
coffee filling chamber. Do not use a metal object when picking up the coffee from the
chamber. Use a wooden or soft plastic spoon.
• If you want additional ground coffee, add coffee to the coffee bean chamber and operate
the appliance by pressing the power button. The coffee is grinded according to the
previous fineness setting, unless you change it.
WARNING!!
The cover of the coffee bean chamber must be closed for your appliance to work.
WARNING!!
In order for your appliance to start grinding, the ground coffee chamber must be properly
installed in the appliance.
24
Need help?
Do you have a question about the SIGNATURE and is the answer not in the manual?