Editing The Scheduled List - Samsung DVD-SH893 User Manual

recording
VPS/PDC : VPS(Video Programme System) or PDC (Programme Delivery Control) function.
~
- If you set this function on, you can control the starting and ending time of recording by special
signal included in the broadcasting signal. If a TV programme is shortened or starts earlier or
later than scheduled, this function synchronizes the starting and ending time of recording with
the actual broadcasting time automatically.
- Set up the start-time EXACTLY according to the published TV schedule. Otherwise the timer
recording will not operate.
- Do not select PDC or VPS unless you are sure the programme you wish to record is
broadcast with PDC or VPS.
~ TiTLE : To label the title name, press the rED(a) button.
Title renaming screen appears.
Follow steps 4 and 5 of "Renaming (Labeling) a Title" on pages 86~87.
. After selecting the set up value for each mode, press the OK button to select Save.
~ will appear on the front panel. It means that a timer recording is registered.
if the timer settings overlap;
The programmes are recorded in order of priority. After recording of the first programme is complete, the
second programme starts being recorded.
To exit without saving the current setting
Press the EXiT (
To return to the previous menu
Press the rETUrn button if you don't want to set a timer recording.
. Turn the power off to finish the Timer Recording setting.
Timer Recording will not work when the power is on.
M
`
The timer recording time may differ from the set time depending on disc status and overall timer recording status
(for example, recording times overlapping, or when the previous recording ends within 2 minutes before the start
time of the next recording.)
`
You can make the Timer Recording up to 12 programmes.
`
If HDD disk has no available recording space,
`
If you have set the Timer Recording using VPS/PDC, the fan can still operate and make a noise when the power is
off.

Editing the Scheduled List

Follow these directions to edit the Scheduled List.
N
Using the TiMEr button
1. With the unit in Stop mode, press the TiMEr button.
. Press the $% button to select the Scheduled List, then press
the OK or + button.
_ recording
) button.
blinks. It means that HDD disk has no space to record.
HDD & DVD RECORDER
HDD
Library
Guide
Channel
Timer Record
Disc Manager
Setup
m MOVE
Timer Record
Scheduled List
►
Recorded List
►
sSELECT rRETURN eEXIT