Copying From A Camcorder - Samsung DVD-HR753 Instruction Manual

6
SP(35:12) >
Record Mode
DV
The DV device is connected
< MOVE r RETURN

Copying from a Camcorder

You may control the Camcorder using the IEEE1394 (DV) interface.
1. Connect the DV output jack of your camcorder to the DV input jack
on the front of your HDD & DVD RECORDER using a DV cable.
2. Press the HDD or DVD button.
If you select DVD, press the OPEN/CLOSE button and place a
recordable disc on the disc tray. Press the OPEN/CLOSE button to
close the disc tray. Wait until LOAD disappears from the front panel
display.
3. Press the REC MODE button repeatedly to select the recording
speed(quality).
➞ SP ➞ LP ➞ EP ➞ XP
4. Press the INPUT SEL. button to select DV.
If the input is set to DV, a playback/record menu that enables
camcorder control appears on the top of the screen.
5. Select the Play (►) icon on the upper part of the screen to playback
the camcorder and fi nd the starting position to copy.
To start recording, use the ◄► buttons to select Record ( ● ) icon
6.
in the top side of the screen, then press the OK button.
You can press the REC button of the remote control to start
recording.
To stop recording
Press the STOP ( ) button to stop or fi nish a recording in progress.
• When using DVD-RAM/±RW/±R discs, the message "Updating the
information of disc. Please wait for a moment" is displayed.
M

To display playback related icons on the screen, press any
direction button on the remote control.
English - 65
SXCVKL
HR755/HR756 Only