On-Screen Menu Navigation; Plug & Auto Setup - Samsung DVD-HR753 Instruction Manual

System Setup
HDD & DVD RECORDER Library
HDD
Title
Library
DivX
Timer Record
Music
Disc Manager
Photo
Setup
m MOVE s SELECT r RETURN e
Auto setup will be started.
Yes No
Auto Setup
Please wait.
63%
Stop
Auto channel scan completed successfully.
Press the [OK] button to auto clock set.
Yes No

On-Screen Menu Navigation

The on-screen menus allow you to enable or disable various
|
|
functions on your HDD & DVD RECORDER.
|
| Press the MENU button to open the on-screen menu and then use
the following buttons to navigate through the on screen menus.
▲▼, ◄► buttons
1.
EXIT
Press these buttons on the remote control to move the selection bar
▲▼, ◄► to cycle through the menu options.
2. OK button
Press this button on the remote control to confi rm any new settings.
3. RETURN button
Press this button on the remote control to return to the Previous
menu screen displayed or to exit the on-screen menu.
4. EXIT button
Press this button to exit the on-screen MENU.
Plug & Auto Setup
Your HDD & DVD RECORDER will automatically set itself up when
it is plugged in for the fi rst time. TV stations and clock will be
stored in memory. The process takes a few minutes. Your HDD &
DVD RECORDER will then be ready for use.
1. Connect the RF cable as indicated on page 18.
(Connecting Your HDD & DVD RECORDER to the TV Using the RF
Cable and scart cable.)
To use HDMI cable (not supplied), make the Audio/Video
connection before plugging in the power cord or after fi nishing the
"Plug & Auto Setup." Do not connect the HDMI cable while the "Plug
& Auto Setup" is progressing.
2. Plug the HDD & DVD RECORDER into the mains. "AUTO" in the
front panel display fl ickers.
3. Press the OK button to start the auto setup.
4. Auto channel scan will be started.
• The number of stations automatically stored by the HDD & DVD
RECORDER depends on the number of stations that it has found.
5. After auto channel scan is completed, auto clock setting will be
started automatically in 10 seconds. If you want to start auto clock
setting immediately, press OK button. If you do not want to do auto
clock setting, select No using the ◄► buttons, then press the OK
button.
English - 25