Safety Instructions; Name Of Parts; Correct Positioning - Klarstein BC-90 Operation Manual

• Children should be supervised to ensure that they do not play with the appliance.
• Do not use mechanical devices or other means to accelerate the defrosting process, other than
those recommended by the manufacturer.
• Do not damage the refrigerant circuit.
• Do not use electrical appliances inside the food storage compartments of appliance, unless they
are of the type recommended by the manufacturer.
• House hold used only.
1. Ice box and drip tray
2. Thermostat
3. Full-width glass shelf
4. Half-width shelf
5. Salad/vegetable Crisper
6. Rack shelves
Well Ventilating
There is need of good ventilation around the refrigerator for easy dissipation
of heat, high efficiency of refrigeration and low power consumption. For this
purpose, sufficient clear space should be needed around the refrigerator. Its
back is at least 10mm away from the wall. Its sides at least have a space of
100mm separately andThe height from over a top is not less than 200mm. A
clear space should be left to open the door to 160°.
Power Supply
The refrigerator is only applied with power supply of single phase alternating
current of 220-240V/50Hz if fluctuation of voltage in the distinct user is of
so large that the voltage onwards the above scope. For safety sake, be sure
to apply A.C automatic voltage regulator to the refrigerator. The refrigerator
must employ a special power socket instead of common one with other elec-
tric appliance. Its plug must match the socket with ground wire.
Power Line Cord
The cord should be neither lengthened nor folded into coil during operation.
Moreover, it id forbidden that cord is kept close onto the compressor at the
back of the refrigerator. The surface temperature of which is quite high when
operating. Touching with it would deactivate the insulation on cause leakage
for electricity.
7

Safety Instructions

Name of Parts

Correct Positioning