Maintenance; Door Reversal Instructions - Klarstein BC-90 Operation Manual

• The refrigerator should be cleaned and maintained once a month.
• When performing maintenance, make absolutely sure that the power plug is first disconnected
from the power outlet.
• Wipe the inner and outer surface of the refrigerator and its accessories with wet cloth, if they are
too dirty, scrub them with neutral detergent and then clean them with water and dry them with
clean cloth. After this, a small quantify of glass wax is recommended to polish the refrigerator
surface with a flannelette.
• For cleaning don't use hot water, diluent, petrol, alcohol, kerosene, washing powder, cleanser,
alkalinous detergent, acid, chemical cloth, etc. So as not damaged the lacquer coat and plastics.
It is forbidden than the refrigerators directly with water. Otherwise, it would cause rusty or weaken
the insulation.
• Be careful to upkeep the sealing rubber bars of the doors. They should always be cleaned.
In order to reverse the opening direction of your door, please follow these simple instructions.
1. Upper Hinge Cover
4. Adjustable Foot
7. Adjustable Foot
• Remove the hinge cover (1) and unscrew upper hinge screw (2). Remove upper hinge (3).
• Lie the unit down on the floor for support.
• Remove the door leg (4 & 7) and unscrew screws (6), remove lower hinge (5).
• Change the position of lower hinge (5) to the opposite side of the appliance, locate and support
the door onto the lower hinge (5), replace screws(6) and adjustable foot (4 & 7), align door and
replace the upper hinge (3) and replace screws (2).
• Fit the hinge cover (1).
9

Maintenance

Door Reversal Instructions

2. Hinge Fixed Screws
5. Down Door Hinge
8. Door
3. Upper Hinge
6. Down Door Hinge Screws