Installation Summary - ADS Technologies Pyro ProDVD API-408 User Manual

INSTALLATION SUMMARY:

1.) Install PYRO Card and install 1394 bus controller drivers from
the Windows CD.
2.) Install camcorder drivers from PYRO CD #1
3.) Apply external power to your camcorder
4.) Turn Camcorder on to VCR/VTR mode
5.) Plug camcorder into PYRO card. Camcorder is recognized
as new device.
6.) Check Device Manager to determine which camcorder driver
you are using.
7.) Install Video Studio 4, Quick Time and Microsoft NetShow
Services.
8.) Select Camcorder Driver(s) you are using.
9.) Re-Boot
10.) Start Video Studio application
11.) Select "G" global properties
12.) Select "Ulead Direct Show Capture Plug-in"
13.) Select Device control and choose either TI 1394 Device
Control or MS1394 (be sure to match the camcorder driver
you are using).
You are now ready to start your first video project.
18