Advertisement
Available languages
Available languages
Configuration
Important: All items in the Shortcuts screen are also in the Preferences. If you change a setting in one screen, it
will also change it in the other.
Shortcuts
To open the Shortcuts screen, press Shortcuts.
To close the Shortcuts screen, tap the X in the upper-right corner.
In the Shortcuts screen, tap an option to select it:
•
Layer Color: This setting determines the color of the light ring around the platter for each layer. Tap A or
B in the center to select the layer, and then tap a color to select it. The light ring will change color
immediately. Tap the X to return to the previous screen.
•
Cue/Loop Quantization: This setting determines the degree of quantization for time-based features.
Select 1/8 beat, 1/4 beat, 1/2 beat, 1 beat, or 4 beats.
•
Sync Mode: This setting determines the degree of synchronization applied when you press the Sync
button on SC5000M PRIME:
o
Bar: The tempo will be synced, and the track will be automatically bar-matched with the track on
the master unit (the downbeats of each bar will be aligned).
o
Beat: The tempo will be synced, and the track will be automatically be beat-matched with the
track on the master unit.
o
Tempo: Only the tempo will be synced (the BPM will match that of the master deck).
•
Screen Brightness: This setting determines the brightness of the touchscreen: Low, Mid, High, or Max.
•
Player #: This setting determines the number of this player. When selecting a source device to browse, this
number is shown next to the device name in the display.
Preferences
To open the Preferences screen, press and hold View/Preferences/Utility and then tap the Preferences tab.
To close the Preferences screen, tap the X in the upper-right corner.
In the Preferences screen, swipe up or down to scroll through the options, and tap an option to select it:
Playback
•
Motorized Platter Start: This setting will determine how quickly your track starts to play. When set to
Normal, the track will play in relation to the motor start-up speed. When set to Instant, the song will begin
playing immediately, and the motor and platter will catch up to the song within a few milliseconds.
•
Track Start Position: This setting determines where the beginning of a track is after it loads. Select the
actual start of the file (Track Start) or the automatically detected beginning of an audio signal (Cue
Position).
•
Default Speed Range: This setting determines the range of the pitch fader. Select +4%, 8%, 10%, 20%,
or 50%.
•
Sync Mode: This setting determines the degree of synchronization applied when you press the Sync
button on SC5000M PRIME:
o
Bar: The tempo will be synced, and the track will be automatically bar-matched with the track on
the master unit (the downbeats of each bar will be aligned).
o
Beat: The tempo will be synced, and the track will be automatically be beat-matched with the
track on the master unit.
o
Tempo: Only the tempo will be synced (the BPM will match that of the master deck).
•
Sync Button Action: This setting determines how the Sync button will act when pressed.
o
Toggle: This mode allows you to toggle sync on and off without having to hold Shift.
o
Shift Disable: This mode requires Shift to be held in order to turn off sync.
•
Pitch Control Type: This setting determines the primary function of the Pitch Bend buttons. Select Pitch
Bend to keep the primary function as momentarily reducing or increasing the pitch, or select Range to set
the primary function to adjusting the range of the pitch fader. The function not used as the primary will still
be available by holding Shift and using the Pitch Bend buttons.
15
Advertisement
