A. Understand How Wall Plate Affects Teton HD The most common installation for the Teton HD is in combination with the Winegard Wall Plate which has a built-in amplifier that is controlled by a simple On / Off switch. When the power is turned On, then the Wall Plate amplifies the Teton HD antenna and also routes the signal through the over-the-air antenna.
Disclaimer: Although every effort was made to ensure the accuracy of the contents of this manual at time of publication, errors may exist. WiFiRanger — A Winegard Company does not guarantee expressly or implicitly, nor take on any legal responsibility about the correctness, exhaustiveness, or usefulness of information in this Owners Manual.
Need help?
Do you have a question about the WIFIRANGER Converge Teton HD and is the answer not in the manual?
Questions and answers