Dab Operation; Auto Scan; Manual Tuning; Presetting Stations - JVC RD-D227B Instruction Manual

Wireless flat panel dab hi-fi
Table of Contents

Advertisement

DAB Operation

To listen to the tuned stations press the
button, you will skip to the previous or next stored station (including primary and
secondary station). The unit will display the station name.

Auto Scan

The auto scan will search for all DAB Band III channels. After the scan has finished, the first
alphanumerically found station will be automatically selected.
1. Press the
show "SCANNING" and then "SCAN ##"that indicates the progress of the scan and the
amount of stations that have been found so far.
2. Once the scan has finished, the unit will display the total number of stations have been
found. All the stations that have been found will be stored automatically.
To explore the found stations, press the
You may press and hold the /CLEAR button to clear the previously tuned stations before running
an auto scan.

Manual Tuning

As well as the auto tune function, you can manually tune the receiver. This can help you
when aligning your aerial or when adding stations that were missed while auto tuning.
1. Press and hold the
"Manual tune".
2. Press the
5A to 13F.
3. After your desired channel number is selected, press the
The display will show "TUNING".
4. The unit will start to scan.

Presetting Stations

You can store up to 20 of your favourite DAB stations to the memory. This will enable you to
access your favourite stations quickly and easily.
1. To store a preset, you must first be listening to the station that you would like to save.
2. Press PROG button on the remote control. The display will show "## Empty", and the
preset number will flash.
3. Press
4. Press the PROG button to confirm your station, the display will show "SAVED".
18
/SCAN button on the remote control to start Auto Scan. The display will
/SCAN button to select Manual tune, the display will now show
button to cycle through the DAB channels, which are frequency from
button on the remote control to select your desired station preset number.
button. Each time you press the
button to the selected station.
/SCAN button to confirm.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents