Adjusting The Sound Effect; Adjusting The Brightness; Setting Of The Clock; Time Display - JVC RD-D227B Instruction Manual

Adjusting the Sound Effect

Press the EQ button the remote control repeatedly to select Pop, Classic, Jazz or Rock for
your desired sound effect.

Adjusting the Brightness

Press the DIMMER button to select the brightness level.

Setting of the Clock

Manual Setting of the clock can only be done in STANDBY mode.
1. In STANDBY mode, press and hold the CLOCK button on the remote control until the
hour digits are flashing.
2. Press the
press the CLOCK button to confirm, then the minute digits will flash.
3. Press the
button on the remote control to confirm.
/SCAN button to select 12-hour or 24-hour mode.
4. Press
5. Each activated state will be cleared if any buttons are not pressed in about 15 seconds.

Time Display

When in ON mode, press the CLOCK button to show the current time on the display for a
few seconds.

Synchronising the Clock

When in STANDBY mode, press and hold /CLEAR button to synchronise the clock.
Press the
• RADIO: Only synchronize with the RDS radio station.
OFF: Turn off clock synchronisation.
•
Press button to confirm.

Setting the Alarm Timer

The clock must be correctly set for the timer to operate correctly.
1. In STANDBY mode, press and hold the SLEEP/TIMER button on the remote control
until the hour digits flash on the display.
2. Press the
SLEEP/TIMER button to confirm. The minute digits will flash on the display.
3. Press the
the SLEEP/TIMER button to confirm, the tuner timer will flash on the display
4. Press the
mode, and then press the SLEEP/TIMER button to confirm, the display will show the
volume level.
5. Press the
SLEEP/TIMER button on the remote control to confirm, " " will show on the display.
16
button on the remote control to adjust the hour digits while flashing, then
button to adjust the minute digits while flashing, then press the CLOCK
button on the remote control to select below options:
button on the remote control to adjust the hour digits, and then press the
button on the remote control to adjust the minute digits, and then press
button on the remote control to select BUZZER, DISC, FM, DAB, or USB
button on the remote control to adjust the volume, and then press the