Advertisement
CHECK ELECTRICAL REQUIREMENTS
This 3-Person Corner Sauna requires 20 amp electrical
power. If your home is not already equipped
to handle 20 amp, you will need to have an
electrician make the necessary electrical
modifications.
CHOOSING A LOCATION
The sauna must be placed INDOORS, on a fairly level
surface. Area must be dry, as moisture will cause damage
to the sauna.
YOU WILL NEED
•
Ladder
•
Power Drill
(optional)
•
Stocking feet
(dark soled shoes can stain the unfinished
wood surface of the sauna interior)
3 PERSON CORNER SAUNA
BEFORE YOU BEGIN
:
CARTON CONTENTS
Open all cartons and inspect to ensure that no parts
are missing. Use the Carton Contents listing and diagram
on the following page to familiarize yourself with the
parts of the sauna.
INSTRUCTIONS
Read through all assembly steps and safety information
in this manual before beginning sauna installation.
2 PERSON ASSEMBLY
Advertisement
Table of Contents
Related Manuals for Blue Wave HeatWave Sauna
Summary of Contents for Blue Wave HeatWave Sauna
- Page 1 3 PERSON CORNER SAUNA BEFORE YOU BEGIN CARTON CONTENTS CHECK ELECTRICAL REQUIREMENTS Open all cartons and inspect to ensure that no parts This 3-Person Corner Sauna requires 20 amp electrical are missing. Use the Carton Contents listing and diagram power. If your home is not already equipped on the following page to familiarize yourself with the to handle 20 amp, you will need to have an parts of the sauna.
- Page 2 Carton Breakdown & Parts Schematic – 3 Person Corner Sauna CARTON 1: KEY # DESCRIPTION Top maintenance panel Top panel Bottom Long bench front Long bench top Short bench front Short bench top Back Rest Radio Towel Rack Magazine Rack RADIO / ACCESSORY HOUSING BOX* Wooden Radio Housing Box Oxygen Ionizer...
- Page 3 Sauna Assembly BOTTOM & BACK PANELS • Locate the BOTTOM PANEL (3) and position it approximately where you want your sauna to be located, leaving enough space around all sides for assembly. • Locate the BACK RIGHT PANEL (12), place in grooves along back right side of bottom panel.
- Page 4 BENCHES & FRONT PANELS • Attach the FRONT LEFT PANEL (9) and attach FRONT RIGHT PANEL (10). Insert the screws into the corresponding holes, shift panels to fasten together securely and lock into place. • Locate the LONG BENCH FRONT (4), position into grooves on the left side of sauna.
- Page 5 TOP PANEL • Locate the TOP PANEL (2). If necessary, unscrew the MAINTENANCE PANEL (1) from the top of the TOP PANEL (2). • Align top panel on top of sauna, feed connectors through the guide holes in the left front and back corner of the top panel.
-
Page 6: Control Panel
Congratulations, assembly of your sauna is now complete! CONTROL PANEL • Use the ON/OFF button to turn on the sauna • When the sauna is turned on, the set temperature is 101°F (40°C) • Change the temperature by pressing the buttons to increase or decrease the set temperature •... -
Page 7: Tips For Use
TIPS FOR USE: • Prior to initial use, wipe down all surfaces of the unit with a damp cloth. • Turn on unit and set to 104° F for one hour. This will ensure that all factory dust is removed or burnt off. •... - Page 8 HYPERTHERMIA 30 minutes or less is the recommended length of time for a single sauna session. Hyperthermia occurs when the internal temperature of the body reaches a level several degrees above the normal body temperature of 98.6° F (37° C). Being properly hydrated, using the sauna for reasonable lengths of time, and being aware of your body’s reaction to heat will help prevent hyperthermia.
- Page 9 1. HeatWave Saunas™ have a 5-Year Warranty against defects in materials and workmanship. To receive the warranty, the card must be filled out completely and returned. This 5-Year Warranty covers the sauna. The radio in your HeatWave Sauna™ is covered by a limited 1-Year Warranty.
Need help?
Do you have a question about the HeatWave Sauna and is the answer not in the manual?
Questions and answers