Table of Contents
Advertisement
Attaching the Arm
1.
Insert the end of the arm marked with the + and –
icons into the base's receiver.
You may need to rotate the arm back and forth in order to
completely insert it into the receiver. When fully inserted,
the metal stud should not be visible.
8
2.
Lift the arm up to approximately a 45° angle. This will
make it easier to continue the assembly.
Use the hex key (N) to turn the swivel set screw on the back of
the arm to prevent the arm from freely swiveling on the base.
Overtightening will lock the arm and prevent it from swiveling.
B
N
1X
1X
Advertisement
Table of Contents
