Safety Warnings - GABOR DMSS-502 User Manual

Dual monitor sit-or-stand desktop workstation for 17 to 27 in. flat-panel or curved screens
Table of Contents

Advertisement

Thank you for choosing Gabor.
The Gabor Dual-Monitor Sit-or-Stand Desktop Workstation can securely support two flat-panel or curved monitors from 17 to 27 inches. A sturdy two-section
articulating arm offers control over swivel, tilt, rotation, and height for precise monitor and keyboard placement for sitting or standing while you work.
A keyboard tray is designed with ample room for a full-sized keyboard and mouse. And two separate accessory slots can hold two devices like a smartphone
or calculator, and a handheld recorder. This workstation mounts to a desktop with a heavy-duty grommet or low-profile clamp that will fit into a space with
tight clearance, like a cubicle. Integrated cables connect with your computer to offer convenient desktop access to two USB 3.0 ports. Cable guides organize
your cables and minimize clutter.
If this product is missing hardware or there are defective parts, please visit www.madebygabor.com or call Customer Service at 212-594-2353.

Safety Warnings

Please read and follow the instructions, and
keep this manual in a safe place.
To avoid damage to this product, be careful
not to overtighten or improperly thread any
of the threaded fittings.
Clean this product with only a soft, dry cloth.
Make sure that this product is intact and
that there are no missing parts.
2
Mounting surfaces should be sturdy and
flat. Do not install this product on a weak,
uneven surface.
Do not install this product on an unsteady
structure or one that is prone to vibration,
has a chance of being impacted, or is
susceptible to other movements. Reinforce
the structure as necessary before installing
this product.
Make sure everything is secure before
proceeding to the next step.
Do not exceed the maximum load capacity.
All images are for illustrative purposes only.

Advertisement

Table of Contents
loading

Table of Contents