Table of Contents
Advertisement
Attaching the VESA Plates to the Monitors
Important! Before you attach the VESA plate, hand thread one of the screws (M-A or M-B)
to determine which size is appropriate for your monitor.
1.
Place the VESA plate on the back of the
monitor with the notched end facing the
bottom of the monitor.
2.
Hand thread one of the screws (M-A or M-B)
to determine which size is appropriate for
your monitor.
3.
Place a washer (M-C) on each of the screws,
and install the VESA plate directly to your
monitor. Fasten with a Phillips screwdriver.
Important! The screws should be tightened
until snug. Don't overtighten.
14
100
75
VESA
75
100
PATTERNS
M-A
M-B
M-C
4X
4X
4X
If the screw is
too short, it
may not hold
the display. If
it's too long, it
may damage
the display.
Advertisement
Table of Contents
