Fundamental Safety Precautions; Learn To Know The Machine; General Rules; Preparation - Gardenpro KCR26RC-BS User Manual

3. FUNDAMENTAL SAFETY
PRECAUTIONS.

1.1 LEARN TO KNOW THE MACHINE

HARZARD! Carefully read this instruction
completely. Abide by all the "SAFETY
PRECAUTIONS", before, during and after
using the machine.
Keep this manual and all the attachments for any
future consultation.
In case of any change in ownership, the manual must
be handed over together with the machine.

1.2 GENERAL RULES

IMPORTANT Anyone using the lawn
A1
mower should first of all be acquainted
with the instructions
completely familiarize with the controls to ensure
correct and safe machine use.
A2 Never allow children under 16 and people not fully
acquainted with these instructions to use the lawn
mower.
Special national regulations may indicate the
operator's minimum age.
Never start and use the lawnmower near
A3
other people, especially children or pets.
A4 Keep in mind that the operator or user is liable in
the event of accidents or damages occurring to
other people or to their property.
HAZARD for people.
A5
- Do not carry passengers.
- Do not carry loads or hook on any type of trailer.
- Such overloads could negatively affect the
stability of the machine and overstress the
INSTRUCTION MANUAL
in this manual and
mechanical parts.
- Do not make any changes to the machine.
- Incorrect use of the machine, as indicated in
this paragraph, will invalidate the warranty and
relieve the manufacturer of any liability in case
of any ensuing injuries or damage.
A6 IMPORTANT Users of the lawnmower
must be in good psycho-physical
shape; do not use the machine when tired,
feeling bad or under the influence of drink, drugs
or medicinal products that reduce promptness of
reactions.
TRAINING
A7 The driver must be suitably trained and should
focus in particular on:
- being carful and concentrated during work;
- the fact that a machine sliding down a gradient
cannot be controlled using the brakes. The main
causes of losing control of the machine are:
- lack of wheel grip;
- too fast speed;
- inadequate braking;
- machine not suitable for job to be done
- lack of acquaintance with effects deriving
from terrain conditions, especially on slopes.

1.3 PREPARATION

53