Table of Contents
Advertisement
Safety Instructions
1–6
LSA Control S.L. www.lsa-control.com comercial@lsa-control.com (+34) 960 62 43 01
DANGEROUS ELECTRICAL VOLTAGE
Lethal voltages of up to 375 V DC against ground on all power con-
nections and DC link connections!
The drives must not be switched on unless all covers have been
fitted! When the drive has been disconnected from mains, wait for up
to 5 minutes until the system is de-energized before removing any
covers.
The drive must always be examined for safe isolation from supply!
CAUTION
Use only spare parts approved by Bosch!
CAUTION
Observe all precautions for ESD protection when handling modules
and components! Avoid electrostatic discharge!
The following protective measures must be observed for modules and com-
ponents sensitive to electrostatic discharge (ESD)!
D Personnel responsible for storage, transport, and handling must have
training in ESD protection.
D ESD-sensitive components must be stored and transported in the pre-
scribed protective packaging.
D ESD-sensitive components may only be handled at special ESD-work-
places.
D Personnel, working surfaces, as well as all equipment and tools which
may come into contact with ESD-sensitive components must have the
same potential (e.g. by grounding).
D Wear an approved grounding bracelet. The grounding bracelet must be
connected with the working surface through a cable with an integrated
1 MW resistor.
D ESD-sensitive components may by no means come into contact with
chargeable objects, including most plastic materials.
D When ESD-sensitive components are installed in or removed from equip-
ment, the equipment must be de-energized.
1070 066 091-102 (01.08) GB
Advertisement
Table of Contents
