Configuration (Standalone); Static Colors; Preset Colors; Preset Color Temperatures - Chauvet Colorado Batten Q15 User Manual

Configuration (Standalone)

Static Colors

The static color modes allows for an unchanging color without a DMX controller.

Preset Colors

1. Go to the Static Colors main level.
2. Select the Preset Colors option.
3. Select from Color 1–14.
4. Increase or decrease the dimmer value from 0–100%.

Preset Color Temperatures

1. Go to the Static Colors main level.
2. Select the CCT Temper option.
3. Select from White 1–14.
4. Increase or decrease the dimmer value from 0–100%.

Custom Color Mixing

1. Go to the Static Colors main level.
2. Select the RGBW option.
3. Select which color value to edit, from Red, Green, Blue, or White.
4. Increase or decrease the value of the selected color from 0–255.

Automatic Programs

The COLORado Batten Q15 has preset automatic programs and customizable programs.

Run Program

1. Go to the Auto Programs main level.
2. Select the Run option.
3. Select from AUTO.1–10 (preset programs) or Program 1–10 (customizable programs).
4. Increase or decrease the SPEED from 0–100%.

Customize Program

1. Go to the Auto Programs main level.
2. Select the Edit option.
3. Select from Program 1–10.
4. Select from Scene 01–30.
5. Select which color value to edit, from Red, Green, Blue, or White.
6. Increase or decrease the value of the selected color from 0–255.

Configuration (Settings)

Output Setting

To select how the product keeps from going over the maximum temperature:
1. Go to the Output Setting main level.
2. Select from Power Mode (adjusts output as temperature increases) or Steady Mode (maintains a
lower output to keep temperature steady).

Master/Slave

The Master/Slave mode allows a group of COLORado Batten Q15 products (the slaves) to simultaneously
duplicate the output of another COLORado Batten Q15 (the master) without a DMX controller. To set each
of the slaves:
1. Go to the Master/Slave main level.
2. Select Slave.
To set the master:
1. Go to the Master/Slave main level.
2. Select Master.
3. Select a standalone setting.
• The master is the one that runs a program whether in Auto or Static mode.
• Do not connect a DMX controller to the products configured for Master/Slave operation. The
DMX controller may interfere with signals from the master.
• The master should be the first product in the daisy chain.
Page 24 of 29 COLORado Batten Q15 User Manual Rev. 1
Operation