Table of Contents
Advertisement
Setting up anynet+
the following settings are to use anynet+ functions.
using the anynet+ Function
1. Press The toolS button. Then Press the enter
CEC)".
Press the ▲ or ▼ button to select "Setup", then press the enter
. Press the enter
button to select "Anynet+ (HDMI-CEC)", then press the enter
button.
. Press the ▲ or ▼ button to select "On", then press the enter
➣
The "Anynet+ (HDMI-CEC)" function is enabled.
➣
If you select "Off", "Anynet+ (HDMI-CEC)" is disabled.
➣
When the "Anynet+ (HDMI-CEC)" function is disabled, all the Anynet+ related operations
are deactivated.
turning an anynet+ Device off automatically when the tV is turned off
1. Press the ▲ or ▼ button to select "Auto Turn Off", then press the enter
. Press the ▲ or ▼ button to select "Yes", then press the enter
➣
The Auto turn off function is enabled.
➣
If you select "No", the Auto turn off function is cancelled.
Press the eXIt button to exit.
➣
The Select Device setting of the TV remote control is to be set to TV to use the Anynet+
function.
➣
If you set "Auto Turn Off" to "Yes", connected external devices are also turned off when
the TV is turned off. However, if the device is recording, it may not be turned off.
button to select "Anynet+(HDMI-
button.
button.
button.
button.
english - 1
tools
anynet+ (hDmI-CeC)
Picture mode
:
Standard
Sound mode
:
Custom
Sleep timer
:
off
SrS tS Xt
:
off
energy Saving
:
off
Dual l-ll
:
mono
move
enter
tV
P
View tV
Select Device
record
menu on Device
Device operation
receiver
:off
Setup
move
enter
return
Setup
anynet+ (hDmI-CeC)
: off
auto turn off
: off
Searching Connections
move
enter
Setup
anynet+ (hDmI-CeC)
: on
auto turn off
: off
Yes
Searching Connections
move
enter
e exit
off
on
return
no
return
Advertisement
Table of Contents
