Setting Compression; Downmix Of Dolby Digital Dvds; Activating The Screensaver; Resetting The Device - Blaupunkt IVOD-1022 Operating And Installation Instructions

u
Call up the setup menu.
u
Use the arrow buttons
the "AUDIO SETUP" menu entry.
u
Confirm with the ENTER/PLAY but-
ton C.
u
Use the arrow buttons
the "DUAL MONO" menu entry.
u
Press the arrow button
u
Use the arrow buttons
the desired setting.
u
Confirm with the ENTER/PLAY but-
ton C.
u
Exit the setup menu with the DVD SETUP
button ;.
The setting is stored, you exit the setup
menu.

Setting compression

You can use "COMPRESSION" to set the dy-
namics of a Dolby programme in increments
from "OFF" to "Full". Select the "FULL" set-
ting for full dynamic adjustment.
u
Call up the setup menu.
u
Use the arrow buttons
the "AUDIO SETUP" menu entry.
u
Confirm with the ENTER/PLAY but-
ton C.
u
Use the arrow buttons
the "COMPRESSION" menu entry.
u
Press the arrow button
u
Use the arrow buttons
the desired setting.
u
Confirm with the ENTER/PLAY but-
ton C.
u
Exit the setup with the DVD SETUP
button ;.
The setting is stored, you exit the setup
menu.

Downmix of Dolby Digital DVDs

= to select
/
The IVOD-1022 uses the downmix function
to calculate a compatible stereo signal from
the Dolby Digital signal.
You will fi nd the downmix setting under
"SPEAKER SETUP" in the setup menu.
= to select
/
=.

Activating the screensaver

= to select
/
The IVOD-1022 has a screensaver which
prevents images (e.g. menus) being burnt
into the liquid crystal display.
If the screensaver is activated, a logo is
displayed approximately 60 seconds after
the last user action to prevent individual
images being burnt into the screen.
You will fi nd the setting for the screen saver
under "SCREEN SAVER" in the "GENERAL
SETUP" menu.

Resetting the device

You can reset the device, thereby clearing
all personal settings.
Note:
= to select
/
This cannot be performed when a DVD is
inserted.
u
u
= to select
/
u
=.
= to select
/
The menu for the preferences is dis-
played.
u
u
The "RESET" menu entry is marked.
If you really wish to reset the device,
u
The basic factory settings are loaded.
DVD SETUP BASIC SETTINGS
Call up the DVD setup menu.
Use the arrow buttons
the "PREFERENCES" menu entry.
Confirm with the ENTER/PLAY but-
ton C.
Use the arrow buttons
the "DEFAULTS" memory entry.
button =.
Press the
press the ENTER/PLAY button C.
= to select
/
= to select
/
27