Table of Contents
Advertisement
PAGE 38
Notifications and Required Information
Europe (2.4 GHz) Approved Antenna List
Table A.3. Antennas approved for use with WCM802 (2.4 GHz) RF Modules in Europe
Part Number
A24-HABMM-P6I
A24-HBMM-P6I
A24-HABSM
A24-QABMM-P6I
A24-QBMM-P6I
A24-Q1
* Can be approved for portable applications if integrator gains approval through SAR testing
IC (Industry Canada) Certification
Since the 2.4 GHz band is not harmonized throughout Europe, a notification must be sent to each
country prior to shipping product according to Article 6.4 of the R&TTE Directive. A list of national
contacts for most European countries may be found at www.ero.dk/.
The following technical data (relating to the WCM802) is often required in filling out a notification
form.
• Frequency Band: 2400.0 – 2483.5 MHz
• Modulation: Frequency Shift Keying
• Channel Spacing: 400 kHz
• ITU Classification: 400KF1D
• Output Power: 100 mW EIRP
• Notified Body Number: 0891
Contact Horner if additional information is required.
Type
Gain
Dipole
2.1 dBi
Dipole
2.1 dBi
Dipole
2.1 dBi
Monopole
1.9 dBi
Monopole
1.9 dBi
Monopole
1.9 dBi
Labeling requirements for Industry Canada are similar to those of the FCC. A clearly visible label
on the outside of the final product enclosure must display the following text:
Contains Model 9XStream Radio (900 MHz), IC: 4214A-9XSTREAM
Contains Model 24XStream Radio (2.4 GHz), IC: 4214A 12008
Integrator is responsible for its product to comply with IC ICES-003 & FCC Part 15, Sub. B -
Unintentional Radiators. ICES-003 is the same as FCC Part 15 Sub. B and Industry Canada
accepts FCC test report or CISPR 22 test report for compliance with ICES-003.
20 JUN 2005
Application
Fixed/Mobile *
Fixed/Mobile *
Fixed/Mobile *
Fixed/Mobile *
Fixed/Mobile *
Fixed/Mobile *
WCM802/900
Min. Separation Distance
20cm
20cm
20cm
20cm
20cm
20cm
Advertisement
Table of Contents
