Silvercrest SVG 2.0 A2 User Manual And Service Information page 23

English
 Attach the source of video output (e.g. camcorder) to the Video Grabber. You now have the
choice of the following types of connection:
Video / S-Video Signal
 To transfer images connect either the S-Video cable (3) (same connectors at both ends of the
cable) or the yellow connector of the AV cable (4) (yellow, red and white connectors at both
ends of the cable) with the respective sockets of the connection adapter and your desired
source.
 Do not plug both the S-Video cable and the yellow plug of the RCA cable in at the same time.
Audio Signal
 To transfer sound connect the red and white connectors of the AV cable (4) (yellow, red and
white connectors at both ends of the cable) with the respective sockets of the connection
adapter and your desired source.
Scart Adapter
 If your source does not have a video or S-Video connection use either the S-Video cable (3)
(same connectors at both ends of the cable) or the yellow connector of the AV cable (4)
(yellow, red and white connectors at both ends of the cable) with the scart adapter and then
connect this to your source in order to transfer sound.
 To transfer sound also connect the red and white connectors of the AV cable (4) (yellow, red
and white connectors at both ends of the cable) with the scart adapter and your desired
source.
 Plug the Video Grabber's USB connector into a free USB 2.0 or USB 3.0 port, ensuring your PC is
switched on. Use the enclosed extension cable (6) if necessary to extend the reach of the cable. If
possible, ensure that the Video Grabber is directly connected to your PC (not via a USB Hub).
Only use the device with a USB 2.0 or USB 3.0 connection.
 The operating system will automatically detect the Video Grabber. Follow the instructions on the
screen.
 Use the enclosed software to record from your source. The software provides detailed usage
instructions in electronic format. Start the relevant program.
22
SilverCrest USB 2.0 Video Grabber SVG 2.0 A2