Siemens DigiTRON Series Installation, Operation And Maintenance Manual page 2

Foreword
Thank you for purchasing a Siemens Energy Subsea product. The information contained in this
document is an overview including the protection, storage, shipment, unpacking, deployment and
maintenance for DigiTRON connector product range.
Revision Summary
This page records the revision status of the entire document and its authorisation for issue.
Copyright © 2020 Siemens Energy Subsea Connectors, (a division of Siemens Energy plc),
Subsea Excellence Centre, Ulverston, Cumbria, LA12 9EE, England.
Compiled
Rev
by
6 R Wyatt
5 R Wyatt
4 P.Westwell
3 P.Westwell
2 P.Westwell
1 P.Westwell
Unrestricted
IMPORTANT
READ CAREFULLY BEFORE USE
KEEP FOR FUTURE REFERENCE
Approved
Date
by
26.06.2020 E Chaize
21.02.2020 J.Hardisty
27.11.14 B.Leach
29.4.2014 B.Leach
B.Leach
B.Leach
Issue Date Page(s) Affected/Remarks
26.06.2020 Updated onto new IOM template with product
safety advice clearly identified.
DigiTRONe and DigiTRON3 added.
Section on Caps and Dummies added.
Alternative test connector added (from IOM-002-
CAM, so this IOM can be obsoleted).
21.02.2020 Safety warning added regarding differential
pressure rated products not to be used for fixed
pressure vessel installations.
27.11.14 Misalignment tolerances updated, section 5
warning note added.
29.4.2014 New design cover and complete document
reformat.
12.3.2014 Re-format, various text amendments,
1.8.2013 First issue
Document No: IOM-002
Issue Date: 24/09/2020
Revision: 6
Page: 2 of 42