Table of Contents
Advertisement
Danger caused by improper operation and foreseeable misuse
Improper operation and foreseeable misuse may present a danger to you and others and cause
material damage. Carefully read the enclosed instructions and all other applicable documents,
particularly the "Safety" section and the warnings.
Danger! Risk of death from electric shock if shuttle pins (on the plug connector) are
depressed e.g. with a screwdriver when plug is live (foreseeable misuse).
-
Testing activities must only be carried out by a competent person.
-
Correct test connector shall always be fitted for electrical testing.
Danger! Risk of imminent danger to life, risk of severe personal injury caused by a shuttle
pin projectile due to damage caused to shuttle pins e.g. with a screwdriver (foreseeable
misuse).
-
Maintenance and testing activities must only be carried out by a competent person.
-
Correct tools must always be used.
Risk of death due to electrocution
Danger! Risk of death from electric shock due to exposed live pins, e.g. factory or top-side
system test and unmated receptacle is energised.
-
Never energise a receptacle connector when not mated to a plug.
-
Ensure all test procedures are followed.
-
Communication channels and protocols are observed.
Danger! Risk of death from electric shock due to unscreened cables.
-
Do not touch electrical wires while energised. Ensure all test procedures are followed.
Danger! Risk of death from electric shock from any exposed conductors due to stored
electrical energy, e.g. capacitance of cable or elsewhere in the system.
-
Ground all electrical conductors after testing and do not touch conductors until
electrical system is fully discharged. Ensure all procedures are followed.
Danger! Risk of death from electric shock, if product is terminated incorrectly e.g. loose
conductor touching metal body or terminated to metal body in error.
-
Installation/termination activities must be carried out by a competent person.
-
Always electrically ground metal bodies prior to electrically energising a connector.
-
Never hold the product when live.
Danger! Risk of death from electric shock or severe personal injury through burning from
de-mating live conductors by hand.
-
Do not de-mate the product while live
-
Never hold the product while live
-
Ensure all procedures are followed for mating/de-mating connectors.
Unrestricted
Document No: IOM-002
Issue Date:
24/09/2020
Revision:
6
Page:
13 of 42
Hide quick links:
Advertisement
Table of Contents
