4. TURN ON THE FLOODLIGHTS
1.
Plug the light tower into an external power source (a generator for
example).
2.
Flip the circuit breaker to the ON position and check to make sure all lamps
come on. Allow a minimum of 2 minutes for the lamps to reach full
luminance.
3.
Adjust the vertical height as desired.
WARNING!
Be sure to read and follow the manufacturer's instructions regarding the
safe usage of any power source. Failure to do so may result in serious
personal injury or damages.
5. TURN OFF THE FLOODLIGHTS
1.
Flip the circuit breaker to the OFF position to shut down the lights.
2.
Then shut down the external power source and unplug the light tower.
NOTE
Allow the lamps to cool for at least 20 minutes before moving the tower
to avoid breaking the lamps
7