KOMPAN ICON Installation Manual page 7

5) Mount the wire ferrules using a special plier
See specification below!
Wire Ferrules for CAN bus (blue & green wire):
Wire Ferrules for 24V (Orange & Black wire):
Crimping Pliers for End Sleeves (ferrules) Knipex:
Connecting the cables:
1) Put on the screw cap
3) Open the connector using a screwdriver
size 2.5 x 75
Korsvangen 11 Phone:
DK 5750 Ringe (+45) 6362 1250
6) Final result
Kompan order no: A900648-99
Kompan order no: A900648-99
Kompan order no: A900638-99
2) Put cable through the fastener and fasten properly
Twist the shield cords around the cable jacket
4) Mount the wire!
Kompan A/S
Telefax: e-mail:
(+45) 6362 1000 isd@KOMPAN.com
- 7 -