Advertisement
11
< Go back to Table of Contents page
the "Image Tracing" function to upload these types of files, because you'll need the
outline to cut, draw or emboss.
When I import an SVG design into ScanNCutCanvas with very small elements,
the smallest elements disappear when I save the design to an FCM file. How can
I make sure that they are included with the rest of my design?
The reason this is happening is that ScanNCutCanvas will remove tiny design
elements to ensure better cutting quality on the DesignNCut machine. So first
determine if you really need those elements in your design as they may not cut
well. For example, one reason you may want to keep them is if they are meant
to be drawn, not cut. If that is the case, then simply enlarge the overall design in
ScanNCutCanvas before saving to an FCM file.
Cutting & Blade:
What is the overall work area for cutting and/or drawing?
The cut/draw size is up to 11 ¾ in x 11 ¾ in (296mmx298mm) when using the 12 in
x12 in mat and up to 11 ¾ in x 23 ¾ in (296x603mm) when using the 12"x24" mat.
What can I cut with DesignNCut?
DesignNCut has a maximum cutting speed up to 112 MM/s that means you can
cut your simple and intricate projects fast. Our standard blade can cut various
materials (paper, fabric, vinyl and so much more) up to 0.88 mm thick, and our
www.designncutbybrother.com
For additional help or other inquiries please contact our Brother Support Center
http://www.brother-usa.com/Support/
Call: 1-877-BROTHER (877-276-8437) M-F, 9:00am to 6:00pm Eastern Time
Advertisement
