Back / Bottom - Canon RC-V100 Instruction Manual

Back / Bottom

39
40
39 REMOTE A terminal (A 6)
40 Sockets for mounting screws
Use these screw sockets and standard M3 screws to screw the remote controller to a
control desk or other work surface.
41 Terminal selection switch
Determines the terminal that must be used to connect the remote controller to the
camera (REMOTE A or REMOTE B).
42 REMOTE B terminal (A 7)
43 Cable clamps (A 6)
Pass the supplied remote cable through the cable clamps to help prevent it from being
inadvertently disconnected from the REMOTE A terminal.
44 SET UP switches
With the setup switches you can customize various aspects of the remote controller's
operation to your preference. For details, refer to
18
REMOTE A
41
42
43
44
Customization
(A 19).