Canon RC-V100 Instruction Manual page 11

Basic operations
1
1 CAMERA POWER button
Turns the camera on/off. The camera's operating mode is determined by the position
of the camera's Q switch. If the camera's Q switch is set to OFF, the
camera cannot be turned on using the remote controller.
You can check if the camera is on or off by the button's light: The button flashes
quickly (2 to 3 times per second) while the remote controller is connecting to the
camera. When the connection is completed correctly, the button lights up in green.
When the camera is in power save mode or lens exchange mode, the button flashes
slowly (once per second) in green.
NOTES
• When the remote controller cannot correctly connect to the camera, the CAMERA
POWER button will keep flashing quickly. Check that the remote controller is
connected to a compatible camera and, if necessary, that use of the remote
controller has been correctly activated on the camera.
2 Up / Down / Left / Right / SET buttons
Use these buttons to operate the camera's menus and select settings. Press the
navigation buttons to move the orange selection frame in the various menu screens.
Press the SET button to select a menu setting.
Only with a REMOTE B terminal connection: These buttons light up in orange.
3 MENU button
Opens and closes the menu.
Only with a REMOTE B terminal connection: While a menu screen is displayed, the
button lights up in orange.
4 CANCEL button
Press the button to return to the previous submenu or to interrupt some operations
while they are in progress.
Only with a REMOTE B terminal connection: The button lights up in orange.
5 ONSCREEN (output onscreen displays) button
Turns on/off the overlaying of the camera's onscreen displays on video output from the
camera's terminals.
Only with a REMOTE B terminal connection: While onscreen displays are being output
with the video signal, the button lights up in orange.
2 3 4 5 6
7
8
9
11
En