Switching The Phone On/Off - Samsung SGH-V200 User Manual

Tri band gprs telephone
Hide thumbs Also See for SGH-V200:
Table of Contents

Advertisement

Getting Started
2. Plug the adapter into a standard AC wall outlet.
3. When charging is finished, unplug the adapter
from the power outlet and from the phone by
pressing the grey tabs on both sides of the
connector and pulling the connector out.
Note: You must unplug the adapter before removing
the battery from the phone during charging;
otherwise, the phone could be damaged.
Low Battery Indicator
When the battery is weak and only a few minutes of
talk time remain, you hear a warning tone and a
message repeats at regular intervals on the display.
When the battery level gets too low, the phone
automatically turns off.
22

Switching the Phone On/Off

1. Open the folder.
2. Hold down the
switches on.
3. If the phone asks you to enter the phone
password, enter the password and press the OK
soft key. The phone password is preset to
"00000000" at the factory. For further details,
see page 130.
4. If the phone asks for a PIN, enter the PIN and
press the OK soft key. For further details, see
page 131.
The phone searches for your network, after
finding it, the idle screen, illustrated below,
appears on both displays. Now, you can make or
receive a call.
Service Provider
05:17
Sat 02 Oct
Menu
Name
Note: The display language is preset to English at the
factory. To change the language, use the
Language menu option (Menu 6.5). For
further details, refer to page 94.
5. When you wish to switch the phone off, hold
down the
key until the power-off image
displays.
Getting Started
key until the phone
05:17
Sat/02
23

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sgh-v200c

Table of Contents