Samsung SGH-V200 User Manual page 12

Getting Started
1. Insert the battery into the charger, ensuring that
the terminals on the battery are in contact with
those on the charger. Press the battery until it
clicks into place.
2. Plug the connector of the travel adapter into the
jack at the bottom of the charger.
3. Plug the adapter into a standard AC wall outlet.
The LED on the charger indicates the charging
progress with the following colours:
• Red: the battery is charging.
• Green: the battery is completely charged.
• Yellow: the battery is not correctly plugged in
or is operating at a too high or too low
temperature.
20
4. When charging is finished, unplug the adapter
from both the power outlet and the charger.
5. Remove the battery from the charger.
Using the Travel Adapter
The travel adapter allows you to use the phone
while the battery is charging, but this causes the
phone to charge more slowly.
1. With the battery in position on the phone, plug
the connector of the travel adapter into the jack
at the bottom of the phone.
Getting Started
21