AUDAC MBK300S Installation Manual

MBK300S Installation Manual

COMPONENTS

MBK310 FX Series fly frame

MBK320 Connection board set 20°-60°

MBK315 Side board set for FX3.15

FX3.15 Loudspeaker cabinet

(not included with MBK300S)

Steel safety wire Ø 8 mm - 3250 mm

(not included with MBK300S, to be sourced locally because

of local legislation)

Bow shackle 1.5ton

(not included with MBK300S, to be sourced locally because

of local legislation)

ISO 4762 - M10 x 20 mm + DIN 7980 - M10

Table of Contents

Do you have a question about the MBK300S and is the answer not in the manual?

Page 1 FX3.15 Loudspeaker cabinet (not included with MBK300S) Steel safety wire Ø 8 mm - 3250 mm (not included with MBK300S, to be sourced locally because of local legislation) Bow shackle 1.5ton (not included with MBK300S, to be sourced locally because...
Page 2 MBK300S Installation Manual IMPORTANT SAFETY INSTRUCTIONS READ FOLLOWING INSTRUCTIONS FOR YOUR OWN SAFETY Read these instructions and keep them. Never throw them away Heed all safety warnings Follow all instructions Personnel qualification Installation and set-up should only be carried out by qualified personnel that are familiar with rigging techniques and safety recommendations that are outlined in this manual.
Page 3 MBK300S Installation Manual PROCEDURE Remove the U-profiles from FX3.15 cabinet at both sides. Keep the bolts nearby because you will need them in step 2. Mount the FX3.15 side plates to the FX3.15 cabinet. You can use the bolts that were removed in step 1.
Page 4 MBK300S Installation Manual Mount the frame onto the ceiling. Attach the angle adjustment plates to frame using 4x ISO 4762 M10 x 20mm bolts and 4x DIN 7980 M10 spring lock washers.
Page 5 MBK300S Installation Manual Slide the FX3.15 side plates between the angle adjustment plates and secure them in the right angle using 4x ISO 4762 M10 x 20mm bolts and 4x DIN 7980 M10 spring lock washers. Use certified steel cables and shackles to secure the speaker cabinets.